Skip to main content
Omnitracs Knowledge Base

ELD Driver Logs

The ELD Driver Logs report shows a driver's activity and status changes over a specified period of time. Be aware that, during a roadside inspection, the driver must provide logs from the ELD via an ERODS request. If the ELD is functioning and the driver is unable to display their ERODS, the driver may use HOURSGo or a paper copy of their logs.

Dispatchers can use the data to determine driver availability, and driver managers can use it to determine the most efficient use of their resources (for example, drivers who are being under-utilized). Safety personnel can analyze historical data to identify drivers that consistently violate HOS regulations. DOT officials can request a hard copy of the driver log to review the driver's current logs and ensure that the driver is in compliance.

Generate the ELD Driver Log report only when the driver is running ELD firmware and is ELD enabled for the period in question. These reports are for internal review of your drivers' logs. Logs for enforcement officers in an internal audit must be sent electronically from the ERODS page so the officer can retrieve them from the FMCSA website. ELD driver logs comply with the US ELD Mandate requirements and should not be provided to Canadian officials.

This report will display only those drivers that the report generator can view as defined under the User Depot Access permissions

Driver ID
Type the ID of the driver to report.
Start date / End date
The date range for the report. Click the icon to open a calendar po-pup and select a date.


Comments entered for the driver's current duty status are not included until a new status change is entered for that driver.

Rule Set
Select the rule set you want to use for displaying records in the report.
Select a format

View and/or print your report in one of the following formats:

  • HTML (best for viewing)
  • PDF (best for printing)

Click the View Report button.

This report will display only those drivers that the report generator can view as defined under the User Depot Access permissions.


© 2020 Omnitracs, LLC. All rights reserved.
Omnitracs is a trademark of Omnitracs, LLC. All other trademarks are the property of their respective owners.

Omnitracs endeavors to ensure that the information in this document is correct and fairly stated, but Omnitracs is not liable for any errors or omissions. Published information may not be up to date, and it is important to confirm current status with Omnitracs. Specifications subject to change without notice.

This technical data may be subject to U.S. and international export, re-export or transfer (export) laws. Diversion contrary to U.S. and international law is strictly prohibited.


  • Was this article helpful?