Skip to main content
Omnitracs Knowledge Base

Omnitracs One 6.3-Release Notes

Active Alert

Dispatch

Drive/Command

  • You can allow drivers to Cancel stops or Undeliver stops when running a trip in Drive
  • The Connect to Vehicle icon has been updated in Drive.
  • Workflows in Command are now listed alphabetically, excluding the Default workflow, which is always first in the list.
  • Workers using the Drive mobile application have been able to resequence stops, but previously these changes to the stop order would not be reflected in FleetView. Now, if a Workflow is configured to allow Drivers to resequence stops, when drivers change the stop order in the Drive mobile application, these updates will be displayed in FleetView, allowing more accurate tracking of what is occurring in the field. The Workflow setting to enable Resequencing is found under Universal Config| May Day Planner| Allow Driver to Resequence Stops.

  • Now, customers that use CoPilot for Navigation with Drive, the HOS clocks can be displayed at all times when using CoPilot. Workers no longer need to question their how long until their next break or stop to open the Compliance application to see all of their HOS clocks while navigating to the next stop.

DVIR

  • When a Driver Team, both the driver and co-driver, login to the same vehicle, the app will default to the active driver for a signature for the Driver Inspection Report used for DVIR XRS & DVIR 3.0.

OTNav Host

  • Routing between TMS, Omnitracs Navigation, and Fleetview will now match so that mileage is calculated accurately.

Primary Region Concept on Maintenance Entities/ Administration

  • Primary region is being added to all shareable entities to indicate a primary place of belonging where entities get settings from, and where users must have permissions in order to modify attributes of the entities. Entities with a former “Current Region” have been mapped to their current region as their Primary Region. 
  • Shared by Region has been renamed to “Sharing” but still behaves to provide visibility of an entity to other regions. When sharing to a region, child regions will also gain visibility. 
  • For customers using AMG-C devices, drivers will now be able to join any vehicle within a companies fleet. 

Roadnet Mobile

  • You can have Roadnet Mobile reset the equipment when a route is completed, so that when a new route is loaded, the most current equipment is assigned.
  • Drivers can now complete conditional questions in Roadnet Mobile for iOS.
  • In Centralized Messaging, when sending a message to a specific region, the message is only sent to workers whose “Primary Region” is the specified region. (Before 6.3, the message would be sent to all workers shared to that region.)

    Example: Dispatch wants to send a weather alert message to drivers in the Mid-West Region. If John Doe’s Primary Region is not the Mid-West Region, he will not receive the alert, even if he is shared to that region.

  • Roadnet Mobile now passes the Hazmat information of the current and projected load to OT Nav, so that OT Nav can generate a more accurate routing path.

Routing

Strategic Planning

  • There are new Stop Markers on the map options for Stop Marker Text and Stop Color.

  • Omnitracs Privacy statement is available from a link on the Login page, as well as, on the Help menu in the Desktop Client.

  • There is a new Recurring Orders Origin Summary window that shows you the fastest travel time and distance from the service location to its closest depot, as well as, from the service location to its previous depot.

Web Services

  • Time and place related details were added to Event persistence so that those data points are related directly to the time and place of the Event.

XRS

  • There is a new filter enhancement in the Black Box Report to filter by Critical Event Type. This facilitates filtering Critical Event search for specific types of events.

      When running a report, the report selector dialogue will include a section for Critical Event Type selection. User can click the “select” icon to launch the select Critical Event        Type dialogue. The Critical Event Type dialogue will display all critical event types that are relevant to the company. User can also select “Video Request” as a filter type for        events that were manually requested by the driver or by a user

      This feature includes the following:

        *  Filter by Critical Event Type

        *  “Video Request” as a selection that filters for manually requested events

        *  Default value for “speed change” filter updated to “disabled” for ease of use

        *  Formatting optimizations to support new filter selection

 

Active Alert

Allowing Recipients to Self-Subscribe

Found in Omnitracs Web

Overview:

Recipients can now self-subscribe to alerts for a specific service location. Before recipients can add themselves to a service location subscription you need to enable self-subscription in Omnitracs Web. When you enable self-subscription, Omnitracs displays a URL to an Active Alert landing page that you can provide to your customers. When your customers click the link, they will be able to setup their subscription.

Setup:

To enable self-subscription for a Region, edit the Region in the Administration Module of Omnitracs Web. Click Active Alert and then Web Application. In the Self-Subscription area, press the Recipient Type arrow and choose the recipient type that the subscription will default to when the recipient subscribes to alerts for the service location. Check Enable Self-Subscription. This will cause the Self-Subscription URL to be displayed. You can send this URL to your customers so that they can self-subscribe to alerts. (You can click the external link icon to see what the web application page will look like for your recipients.)

Note: If you do not choose a default Recipient Type for the region, you will be unable to check Enable Self-Subscription and you will not be able to continue with setting up self-subscription for your recipients.

clipboard_e7b02702fff624e18388dd37c3b298656.png

Once you have saved your changes to the Region, Active Alert is ready for your customers to use.

Customer Experience:

To sign up to have alerts sent to them, your customers will click the link you send them. The first thing they will need to do is authenticate by providing their Service Location ID and first line of their address.

clipboard_e9876a9062ca869ab776e388513a24764.png

Next, they can add their first and last name. Finally, they need to provide the email address and/or phone number that they want to use to receive alerts. This will give them access to the Active Alert Web App where they can select which alerts to receive.

Note: Instead of the Omnitracs name and logo (visible in the image above) you can have your own brand name and logo displayed by using the “Active Alert Profiles” feature available in the Administration module of Omnitracs Web.

Recipients can also sign up for additional service locations on the Manage Alerts tab of the Active Alert Web Application if self-subscription is enabled.

clipboard_ee6ecdfb170742cdada11280689d48186.png

Improved Subscription Importing for Active Alert 

Found in Omnitracs Web

Subscriptions can now be imported independently of service locations, and they can also include additional recipient information such as name, identifier, and primary region. Additionally, multiple subscriptions for a single service location can now have different alerts enabled, even if the subscriptions have the same notification method and recipient type.

    1.  Go to Omnitracs Web.

    2.  Click the Maintenance module.

    3.  Click the green button and scroll to Service Locations.

    4.  Click the Import Active Alert Subscriptions button.

clipboard_e9c172124fd5de597f1f7cf4e71ca5321.png

    5.  Click the Browse button.

    6.  Select the template file to upload.

    7.  Click the Import button.

 clipboard_eb3578b77268649d5d58312991e057950.png

Note: You can click the Download Import Template File for more information.

You can also import subscription information using the Omnitracs Desktop Client. Click ImportMaintenance Items Active Alert Subscriptions.clipboard_e891f468ea5d4d50dab2342c76d0b43e7.png

API to Retrieve Links to Active Alert Web App

Found in Omnitracs Web

There are 2 ways to use this API, based on which parameters you pass into the API.

     1.  Provide a route key and a stop key and we return a link for that stop.

     2.  Provide an order id and optionally an order begin date; and if we can find a unique order and stop to associate with that info then we return a link for that stop.

 

Dispatch

Force Autonomous Resequence Function

Found in Omnitracs Web

Allows Dispatcher the ability to see if optimization exists for the route and force an autonomous optimization suggestion to optimize the route when needed.

     1.  Click the Route Actions menu.

     2.  Select Autonomous Optimization.

     3.  Select Force Resequence.

     4.  Accept the suggestion to resequence the route.

 clipboard_ed48f8303a62283dfe4cd6596470615d0.png

Add Travel Rules Properties for Equipment Type to Latitude

Found in Omnitracs Web

    1.  Go to Omnitracs Web.

    2.  Click the Maintenance module.

    3.  Click the green button and scroll to Equipment Types.

    4.  Add or edit an existing equipment type.

    5.  Click the Travel Rules tab.

    6.  Make your selections and click Save to save the changes.

clipboard_e591f334754c11169e27546092b23b9aa.png

 

Drive/Command

Cancelling and Undelivering Stops on the Mobile Device 

Found in Drive/Command

Note: When any of the Cancel stops or Undeliver stops functionality is enabled in Command, the skip stops functionality is disabled. 

Before your drivers are allowed to cancel stops on their trips, you must define which types of stops they can cancel, Planned and Unplanned stop types. To enable these options, choose the workflow with which you want to work. Press Universal Config and then press My Day Planner. The My Day Planner settings for the workflow display. Press the Allow Driver to cancel stops arrow and check the box for each type of stop your drivers can cancel. 

Note: This setting is not available if Allow Driver to skip stops is enabled. To disable Allow Driver to skip stops, press the arrow and uncheck all the stop types to remove them.

clipboard_e74d2b62796b673298e4568e13202d716.png

When your drivers cancel a stop, you may want them to provide a reason as to why it was canceled. You will need to create a list of reason codes that display on the mobile device and then assign a list to be used when canceling a stop.

To create a Cancel Stop Reasons list, from the workflow that you want to add them to, press Supporting Data and then press Cancel Stop Reasons. Tap Add List Items to add a reason. Your drivers will see the list of Cancel Stop Reasons when they cancel a stop on the trip. Add as many reasons as you need. You can return to the list at any time and add another reason.

Note: Deleting a reason may create an issue with historical information. 

Once the list is created, you must assign the reason list that will display for the driver when a stop is canceled on the mobile device. On the Universal Config screen, press the Cancel Stop Reasons arrow and choose the list to use on the mobile device when a stop is canceled. 

Remember to press Save Changes so that your edits are sent to the mobile devices that are using the workflow.

Note: Cancel stop only applies to pending stops. Undeliver stop applies to stops that have been arrived manually or automatically, but the stop can’t be serviced and the          driver needs to depart without performing the planned service. Configuration of Cancel stop and Undeliver stop are separate, but similar, both supporting Reason                  Codes that can be configured in Supporting Data.

On the mobile device, if the driver knows immediately that the stop should be canceled, the driver taps the menu next to the stop they want to cancel and then taps Cancel. If the driver wants to see more information about the stop before canceling it, the driver taps View more from the menu next to the stop. When viewing the information, if the driver decides to cancel it, simply tap Cancel Stop. The Cancel Stop window displays and prompts the driver to choose a reason for the cancelation. The driver taps the arrow and chooses from the cancel reasons list. Then the driver taps Yes to cancel the stop.

If the stop has already been arrived, the driver must Undeliver the stop. The steps the driver takes for Undeliver remains the same, but instead of Cancel, Undeliver will display and should be pressed.

     clipboard_ea8bab5e4422d31727f7b03a681b882dc.png

Note: The Cancel stop and Undeliver stop information from Drive will be reflected in Omnitracs Fleetview.

 

Improving the Connect to Vehicle Icon 

Found in Drive

The Connect to Vehicle icon has been changed to a truck, so that a driver can easily tell if the vehicle or Telematics box is connected or is not connected to the mobile device that is running Drive. Previously the icon was a red Bluetooth button that only displayed when the truck was not connected.

Drive-ConnectToVehicleIcon.png

The previous red Bluetooth (BT) icon was only visible when the mobile device was not connected to the vehicle or Telematics box. If the driver pressed the BT icon, a pop-up displayed that allowed the driver to open the Compliance application so the vehicle could be connected or switched. The icon did not clearly communicate connectivity to the vehicle and the icon was not always available.

The new icon is always visible and shows the current state of the vehicle's connectivity. It displays red when the vehicle is not connected and green when the vehicle is connected. The driver taps the icon to see ELD status information. If the vehicle is not connected, a pop-up displays that allows the driver to Connect to a vehicle. If the vehicle is connected, a View More button displays. Tapping Connect or View More opens the Compliance application so that the driver can connect or change the vehicle or view additional Compliance information.

HOS Clocks Overlay with CoPilot 

Found in Drive

To use this feature, the Workflow Fleets must have the following enabled:

    1.  HOS  enabled - Universal Config| Hours of Service)

    2.  CoPilot Navigation enabled - Universal Config| Maps/Navigation

    3.  Navigation included in the slide out menu – Universal Config| Core App Settings

If these items are configured, Drivers will have the option pin the HOS Clocks. Pinning HOS Clocks will display the Clocks on both the Maps tab and CoPilot.

clipboard_e751fb80cc165dc006e14613322b10f6d.pngclipboard_e3390587bac2b8aaedaf196ce3336c9cf.png

 

Roadnet Mobile

Automatically Resetting Equipment on Route Completion

Found in Roadnet Mobile for Android

Previously, if a driver loaded a route that had the wrong equipment assigned to it and the dispatcher then assigned the correct equipment to the route,  the route still reflected the incorrect equipment assignment. A new region setting will now have Roadnet Mobile mark the equipment as inactive on the mobile device, when a route is completed. When the driver loads a new route, Roadnet Mobile looks for the most current equipment assignment.

Check the Reset Equipment on Route Completion box on the Phone Settings > Smart Phone - General page to have the equipment marked as inactive on the mobile device, when a route is completed.

clipboard_ee5644dc82db18030159ee0c95b304b42.png

Conditional Questions on iOS Mobile Devices

Found in: Roadnet Mobile for iOS

With Roadnet Mobile for iOS, there is now a related question that only displays when a Worker provides a specific answer to the previous question in Form Tasks. 

To create a conditional question, when adding or updating a form in Mobile Workflow in Omnitracs Web, add a question with a Yes/No response type and check the Allow follow-up questions box. This is the initial question, the question that starts the question chain. If the driver answers Yes to the initial question, a second question displays. If the driver answers no to the initial question, a different question displays.

To add a second question to the chain, simply drag and drop the second Yes/No form control to the Drop Follow-up Control area. The Assign Form Control Conditionally window displays. You must choose if this question shows when the driver answers Yes/True or when the driver answers No/False. To do this, click the Is arrow and choose Equal To. Then, in the next field click the arrow and choose the response the worker must provide in order to see the question, Yes/True or No/False. You can have two second questions, one for if the driver answers Yes and one for if the driver answers No. You can add up to three levels of questions. So another question can be added, based on the drivers response to the second question.

clipboard_e29897c6398124a5885975c14d0ec16ea.png

Note: Roadnet Mobile allows the driver to see three levels of questions.

Conditional questions must have Yes/No response types, but the last question in the chain may have any response type you want. For instance, use a conditional question if you want to collect contact information for a delivery.  Your initial question would be "Did you deliver this order?"

If the driver answers no to the initial question, you might ask a second level question, such as "Why did you not deliver this order?" 

The driver would then type in a response or pick a reason from a list you provide. The form would then be considered complete. Notice that the last question in the chain does not require a Yes/No response type.

If the driver answers Yes to the initial question, you might ask a second question, such as "Did you speak to the manager?"

If the driver answers No, the form could be considered complete.

If the driver answers Yes, then you might ask a third level question, such as "What is the Manager's name?" To which the driver types in a response  and the conditional question is considered complete. Again, notice that the last question in the chain does not require a Yes/No response.

Note: Only three levels of questions will be seen on the mobile device.

RNMobile-TwoTierConditional.gif

If you check Response required on the initial question, the driver must provide answers to any follow-up questions that display. If the initial question is not required, but a follow-up question is required, the driver is not forced to start the chain of questions, but if it is started, any required follow-up question(s) must be completed.

On the iOS device, the driver will see the first question. Based on the driver's answer to the first question, a second question displays. Then, if a third level of questions is available, depending on how the driver answers the second question,a third and final question displays.

 

Routing

"Shared By Region" to show "Sharing"

Found in Omnitracs Client

Shared by Region has been renamed to Sharing.

clipboard_e288939ae54498dd29d282eb5928c2416.png  clipboard_e690df81a6d8442f7b3e281ff0c0d65e8.png

Ability to Hide Service Locations (Unassigned) When Viewing Route Templates 

Found in Omnitracs Client

LWR_Recording.png (922×877)

Editing multiple items has been changed so instead of returning to the "General" tab, the user will remain on the current tab

Found in Omnitracs Client

clipboard_e48cc12d05a97016644aa3fa5e64db467.png

Assign multiple pieces of equipment to cells and have the algorithm work to use the capacity limits

Found in Omnitracs Client

    1.  Click the Maintenance tab and select Cell Sets.

    2.  Double click the Cell Set ID to view the Assigned Cells.

    3.  Right click on the Cell and select Edit.

    4.  Click the Properties tab.

    5.  To assign a Worker and/or Equipment to the cell, enter 1 for the Maximum Routes to create in the cell. .

    6.  In the Equipment Type Restrictions area, choose the Allowed Equipment Types to be used in the cell. Use the arrows to move the equipment types to the proper list.

Note: The assigned Equipment must be allowed in the Equipment Type Restrictions. If an order in the cell does not have an allowed equipment type, the order will not be routed.

clipboard_e611374fe35ae6f8804db706032a57fd6.png

    7.  If you are creating one route for the cell, you can select route ID, worker and multiple equipment that will be assigned to the route, click the Equipment tab.

    8.  In the Available Equipment section, choose the Equipment (Active checkboxto be used in the cell. Use the arrows to move the equipment to the Assigned                             Equipment section.

    9. Click on the Save button.

Note: When assigning multiple pieces of equipment to the cell, the Create Routes process combines the capacity of all equipment to determine the total available capacity for the route.  For example, the trailer’s size 1 capacity is 500 units and the tractor’s size 1 capacity is 10 units. If you assign two trailers and a tractor to the cell, the total available capacity for the route is now 1,010 units.

clipboard_e7a06df1723ebbca63238b7fcd301536e.png

 

Strategic Planning

New Stop Markers Added to Map Options

Found in Omnitracs Client

     1.  Click the Tools tab and select Options - Map.

   clipboard_e690d839f23e3ef45867d1c1aa4bf327a.png

     2.  In the Route Markers section, in the Planning Marker Text drop-down, the following choices have been added:  Day, Day/Week, Location Category, Order Class,                      Origin, Origin/Destination, Service Pattern, Service Pattern Set and Week.

clipboard_e5a052c76038e9a50cc5fd0082335c18b.png

     3.  In addition, in the Marker Color By drop-down, the following color types have been added:  Service Pattern Set Color, Week Color and Origin Color.

clipboard_e2485c1f8738d23c43706af661ac5f6a4.png

Viewing the Recurring Orders Origin Summary

Found in Omnitracs Client

     1.  Click the Planning tab and select Recurring Orders Origin Summary. It processes the Recurring Orders and then opens a new grid window.

clipboard_eedfd15bf27c3de2cbc6e29bd38855ccc.png

     2.  It is displaying all the recurring orders that are in the planning session. The Recurring Orders Origin Summary takes the origin from the territory, and it computes the                Territory Origin Distance to the recurring order and the Territory Origin Travel Time to the recurring order. It also takes the recurring order’s Previous Origin and                  computes the Previous Origin Distance and Previous Origin Travel Time. The Summary displays columns Travel Time Difference and Distance Difference.

clipboard_e73f98ce0f2185f9c599711bd5545952b.png

 

Software Corrections

Work Item Number Issue Components
DVIR-998 Drive DVIR Auto Scrolling, fixed so that it does not go past Safe to operate when selecting No Defects. DVIR
DVIR-1080 DVIR schema is wrong under selected assets - in rare cases when a vehicle had never been used the integration would fail due to improper message formats used when trying to return the equipments attributes. DVIR
DVIR-960 DVIR odometer value should only be entered by the driver if telematics is not connected / DVIR fix was to ensure Telematics-fed odometer is no longer editable by the driver when it is available from the ECM. DVIR
DVIR-920 Previous DVIR task needs to display the declarations for Canada Schedule 1 and List 1. DVIR
DVIR-790 The Breakdown task will now register as a Mid-Trip Inspection event and it will be recorded in XRS DVIR Reporting. DVIR
DVIR-789 DVIR "Inspection Type" selection not properly displayed in XRS DVIR Reporting. DVIR
DVIR-787 Breakdown task - Notes Required attribute from Command Inspection Defects not reflecting during Breakdown task. DVIR
DVIR-786 Breakdown task will not let user edit assets to be inspected / brokendown. DVIR
DVIR-785 Breakdown task is prompting driver to select "Pre / Mid / Post" inspection type - not configurable in Command. DVIR
DVIR-781 Drivers are unable to remove the Tractor from the DVIR task on some Samsung smart phones. DVIR
DVIR-759 Smartphone Form Factor: DVIR Task Add Edit Assets truncates the Inspection form name. DVIR
DVIR-742 Active Assets display out of order in Drive DVIR if asset has numeric value. DVIR
DVIR-797 DVIR has been updated to US XRS to track the active equipment, ensuring the equipment displayed on DVIR is more accurate. DVIR
DVIR-1084 DVIR Location has been updated to reflect XRS HOS Location, and will now be an editable field. DVIR
RPE-18004 Several error messages the widget user receives have been updated to be more accurate.  Active Alert
RPE-38504 Routing 30 App crashing related to active alert import from this account Active Alert
RPE-40770 Now if you select the Not Visible for the truck location visibility, the number of stops remaining is not shown.  Active Alert
RPE-19562 There was an issue that could cause an error for Compliance customers when updating a parent region. This has been corrected. Admin
RPE-19354 OTNav: Driver prompted to download maps upon launching OTNav app. Android IVG Skins
RPE-26673 There was an issue that could prevent Navigation from being able to generate a path when the start or end point was on a closed road and real time traffic was being used. This issue has been corrected, and you are now prevented from being able to choose a start or end point on a closed road. Android IVG Skins
RPE-50059 OT Navigation not recognizing external map file from SD card. Android IVG Skins
RPE-21862 There was an issue using Autonomous Dispatch when the route contained unknown stops. This has been corrected.  Autonomous Dispatch
RPE-21381 An issue that could cause driver log edits from saving properly has been corrected.  Compliance
RPE-37299 There was an issue where an incorrect behavior was being logged when using the yard move feature. This has been corrected. Compliance
RPE-36587 There was an issue that caused Import Routed Solution to fail if there was an existing order on a dispatched route with the same order number as an order being imported. This has been corrected, and a descriptive error is returned for the route. DataTransfer
RPE-38505 An unexpected error was being displayed when importing mobile devices on the OT1 website. This has been corrected. DataTransfer
RPE-17661 There was an issue that could cause the route path deviation distances to be incorrect when the deviation continued for an extended time. This has been corrected.  Dispatching
RPE-21359 There was an issue when attempting to receive large numbers of Mobile Device diagnostic records. The maximum number of Mobile Device diagnostics that can now be retrieved at once is 1,000. Dispatching
RPE-21760 There was an issue where the arrival time for the origin stop could be edited when the route uses the first stop as origin. This has been corrected.  Dispatching
RPE-41414 A fatal error attempting to import mobile devices when checking navigation validation has been fixed. Dispatching
RPE-15164 Roadnet Mobile AMX install documentation updated to cover installation process and needed permissions Documentation
RPE-46805 Help shows incorrect description for Line Item ID Documentation
DCMD-4228 Planner page does not scroll all the way to the bottom. Drive/CMD
DCMD-5189 Arrive and Depart task clones can not be individually configured in Command. Drive will now configure autoArrive/Depart based on the specific Arrive/Depart task (or clone) used for the stop. Drive/CMD
DCMD-5199 Pinning HOS to map in Drive app causes HOS view to get cutoff from Mobile screen. Drive/CMD
DCMD-5269 When the HOS banner is pinned, the 5th clock is cut off and when completing any task with dialog, the dialogs are shifted to the right.  Drive/CMD
DCMD-5270 The Trip context menu and Stop context menus overlap and the menu doesn't dispaear or lose focus when you touch somewhere else on the screen. Drive/CMD
DCMD-5445 CoPilot: Multiple Devices Not Connecting to FleetPortal Profile Drive/CMD
DCMD-5504 Imported Workflow from within Command does not show in OT1 Latitude Region Settings or Add New Route window from FleetView Drive/CMD
DCMD-5563 When sending message to the tablet the API returns a messageFirstviewed event but the driver never opened and viewed the message. Drive/CMD
DCMD-5572 Error fails to start navigation while in Drive app Drive/CMD
DCMD-5755 Drivers are having an issue with trailer verification and appears that the Last Trip Key is misplaced. Drive/CMD
DCMD-5794 Login event returning different tractor than dispatchAssignTruck. Drive/CMD
DCMD-5935 In a team driving situation if the co-driver opens a Smartform but decides not to send it there is no way to cancel out of it until the vehicle stops moving, so the tablet is effectively stuck on the form screen. Drive/CMD
DCMD-6006 Drive mobile app crashing after upgrade Drive/CMD
RPE-15949 RNA Enrichment process incorrectly assigned the geo fence for stop #2 to stop #3. Drive/CMD
RPE-39479 (OT1) Invalid lat/long error bad response error 400. Drive/CMD
RPE-41104 Unplanned break as first stops displays as 0/0 lat long position. Drive/CMD
RPE-48070 The decision to enforce Drive ID and Mobile Logins to match has been reverted. This has been corrected on both the website and route navigator application.  Host
RPE-31703 There was an issue where the Import Template for Workers was missing directions in the column header. This has been corrected.  Import
RPE-57181 Remove Fix for RPE-37470 from 6.3. Driver Timeclock report not showing all Drivers when all regions selected Insight
RPE-17021 There was an issue where it was possible to use an Unserviceable Reason Code with a stop that was not serviceable. This has been corrected.  Latitude
RPE-38500 There was an issue where the exported service location file contained extra columns. This has been corrected.  Latitude
RPE-34157 There was an issue that would cause a crash when trying to edit a worker on a database that was created from a shadow copy if the customer used Compliance. This has been resolved and the system no longer crashes.  Maintenance
RPE-38494 An issue preventing Canadian cities from appearing in the location lists in Omnitracs Web  has been fixed. Maintenance
RPE-20983 There was an issue that caused some items to be duplicated on the Advanced Display Options dialog in Tools/Options. This has been corrected. In addition, there are separate options for service patterns using days between service and service patterns using weeks between service. Miscellaneous
RPE-21382 When a shared view configuration or a shared perspective is selected, and a newer version (modified by another user), the view configuration/perspective is updated and a message is displayed to the user. Miscellaneous
RPE-25650 There was an issue when viewing cancelled orders in Fleetview. This has been corrected.  Miscellaneous
RPE-25658 RTS Migration Wizard error attempting to use an alternate RTS database password Miscellaneous
RPE-25677 There was an issue that would cause the RTS to Omnitracs One Migration Tool to fail if the Roadnet Transportation Suite database did not have a ts_databaseowner set. This has been corrected.  Miscellaneous
RPE-29717 Mobile Device Diagnostics not showing correct version. Miscellaneous
RPE-29732 There was an issue with users being routed to an incorrect URL for the Omnitracs One device module in RNA. This has been corrected. Miscellaneous
RPE-30445 There was an issue that could cause the user to be logged into the wrong environment after upgrading. This has been corrected.  Miscellaneous
RPE-36520 Omnitracs MSI is now countersigned by DigiCert, who purchased Symantec certificate business.  Miscellaneous
RPE-20956 There was an issue that allowed drivers to enter a space in the Consignee field, and then depart the stop. This has been corrected, and at least one character must be entered in the Consignee field. Mobile
RPE-26681 Driver cancels a stop on a route and provides a reason code but in Fleetview the column is blank. Mobile
RPE-29702 Equipment changing on route when it is loaded by driver. Mobile
RPE-29704 There was an issue that prevented some drivers from being able to log into Roadnet Mobile. This has been corrected. Mobile
RPE-41761 Mobile Form Results Report Not Displaying Pictures Captured by some Drivers. Mobile
RPE-50315 Configuration Information is Stale Error During Load Route. Mobile
RPE-19113 There was an issue where Roadnet Mobile was changing the Omnitracs Navigation setting for Commercial Vehicle when no vehicle was assigned to the route. This has been corrected. Navigation
RPE-31364 There was an issue that prevented a user from logging into Omnitracs Navigation from the Customer Portal. This has been corrected. OTNav Host
RPE-34821 Fleetview does not display cancelled reason code for stop OTNav Host
RPE-36147 Driver being routed down hazmat restricted roads - HERE map data issue OTNav Host
RPE-37578 Customer is unable to updated maps due to error: Unable to Proceed: No network connection, unable to check for map updates. OTNav Host
RPE-53815 Routing on Restricted Route OTNav Host
RPE-21658 An enhancement was made to Create Territories' territory depot assignment, so the algorithm assigns the correct depot when multiple depots are available for territory assignment. Planning
RPE-21859 There was an issue that caused the application to terminate when importing recurring orders. This has been corrected. Planning
RPE-25654 Update Routing or Dispatching was failing if one of the routes being pushed had no stops. This has been corrected.  Planning
RPE-28210 Session Transfer would fail if there was a route in the destination session with the same route ID as a route being transferred. This issue has been corrected, and  the route ID for the route being transferred will be changed to RouteID_ TerritoryID. Planning
RPE-30449 Latency concerns with Strategic Planner. Planning
RPE-36563 There was an issue that could cause the routed weeks to show in the wrong order in the Recurring Orders list. This has been corrected. Planning
RPE-39163 An issue that was generating an error when users tried to assign route times to multiple routes simultaneously has been corrected.  Planning
RPE-40771 There was an issue that caused an error when trying to move more than one stop simultaneously if the pass option, Maintain Breaks, is selected has been corrected.  Planning
RPE-52012 An issue preventing the user from assigning route times to multiple routes has been fixed. Planning
RPE-15840 The region has been removed from the header on the Equipment Position History report.  Reporting
RPE-38848 An issue that prevented setting the Current Culture to "English (United States)" for all reports has been fixed.  Reporting
RPE-32160 There was an issue that was preventing the resource groups from loading in the Certify Repair editor. This has been corrected.  RNA Platform
RPE-38489 An issue being able to edit a user that was assigned to roles through user groups only was fixed. RNA Platform
RPE-39478 There was an issue where a user could not login into a pre-production environment due to character enforcement. This has been resolved and the RNA web portal now supports special characters < and >. RNA Platform
RPE-41898 There was an issue with a driver not being able to login to the website due to username case sensitivity enforcement. This has been corrected. RNA Platform
RPE-12717 There was an issue with TravelSpeed exception where ferry routes were used as the road. This has been corrected.  Route Exceptions
RPE-16217 There was an issue where users could see regions that were not assigned to their role, if the region had been moved from the parent region to another parent region. This has been corrected. Routing
RPE-16914 Route is created around the ocean inlet adding a few unassigned to make an unrealistic route for the driver. Routing
RPE-17549 There was an issue where the equipment type field was not populating in a timely manner. This has been corrected. Routing
RPE-18303 There was an issue that could cause the system to work very slowly when multiple users were attempting to route or import simultaneously. Changes were made to reduce the instances of this happening. In addition, a new progress dialog was added to provide users with meaningful information about the progress of their job. Routing
RPE-20006 There was an issue that prevented users from filtering stop templates. This has been corrected and the stop template filters work correctly. Routing
RPE-20075 Stem distance mileage incorrect. Mileage and time to first stop on some routes may be inflated. Routing
RPE-20201 There was an issue where the route quantities were not calculating correctly when both transfer orders and line items were being used. This has been corrected.  Routing
RPE-22146 RA is creating less routes when "Must make all service Time Window" option is turned on resulting in more unassigns. Routing
RPE-23400 Routing pass not creating the most cost effective routes. Routing
RPE-27503 There was an issue that caused a fatal error when dragging an unassigned order to a route on the map. This has been corrected.  Routing
RPE-28989 Route Path Exceptions from CGL Transport causing high CPU load/alarms on Routing 02. Routing
RPE-34487 There was an issue wherein Route Navigator was not allowing partner users to login. This has been corrected. Routing
RPE-35204 When  updating a route template based on an active route, the route template's equipment type was being updated even when the user selected not to update the route template's properties. This has been corrected. Routing
RPE-39496 Unexpected error creating routes Routing
RPE-39771 An issue preventing 'Archived' routes from appearing on the map has been fixed. Routing
RPE-45428 The ability to create cells from routes has been restored. Routing
RPE-49746 A fatal error attempting to open Route Query for users running Windows 10 Pro has been fixed. Routing
RPE-50499 A performance issue when changing regions and the Route Template manifest was open has been fixed. Routing
RPE-51403 There was an issue where a user could not add a business unit. This has been corrected. Routing
RPE-17065 FleetView and Perfmon show mileage from GPS drift while vehicle is parked overnight Telematics
RPE-18122 Discrepancy between the deviceTimestamp and the systemTimestamp. Telematics
RPE-18171 There was an issue where the Device Unplugged exception email notifications occassionally showed the exception occurring in the future. This has been corrected, and the emails now use the region's timezone.  Telematics
RPE-18362 Telematics route is created in a region the Equipment/Telematics Device is not shared to. Telematics
RPE-18465 There was an issue that could cause stationary positions to be created, even when the vehicle was moving. This has been corrected. The stationary logic was using both telematics and mobile GPS data to calculate stationary events on a route. It should only use the preferred source of GPS. When the stationary logic ignores the GPS data, the following is logged: "Adding position point {0} and skipping stationary logic because device {1} is not the position datasource." Telematics
RPE-21882 There was an issue that prevented users from being able to remotely shut down a vehicle. This has been corrected.  Telematics
RPE-22078 Customer is using Active Alert and an updated ETA sent to a customer caused a question on their delivery. After reviewing the route, able to see an Unplanned Stop triggered showing a 1304 hours 57 minutes projected completion time. Telematics
RPE-22834 There was an issue that could prevent the data from an unplanned route moving to the corresponding planned route when the driver logged in. This has been corrected. Telematics
RPE-23417 There was an issue that prevented route cards from being generated for some vehicles in FleetView. This has been corrected. Telematics
RPE-23959 Straight Line Pings from Unknown/Unplanned Stop to Actual Stops Telematics
RPE-36536 Mobile Login appearing blank on Workers in Navigator Telematics
RPE-39148 Remote Vehicle Shutdown getting "An unexpected error has occurred" Telematics
RPE-39492 There was an issue that could cause unplanned routes to appear in the origin's region instead of the equipment's region. This has been corrected and the route should appear in the equipment's region. Telematics
RPE-39744 Performance Monitoring Weekly Report shows no data Telematics
RPE-41090 There was an issue that could cause routes to automatically complete at the incorrect time. This has been resolved.  Telematics
RPE-13400 A typographical error in the documentation describing weeklyTimes has been corrected. WebServices
RPE-16439 A new RetainManualVin has been added to the equipment API. If set to TRUE the VIN will be set with the provided value and will not be overwritten unless explicitly changed.  WebServices
RPE-17602 RouteStatusChanged event retrieved from the REST Event API returns current status of route, not the status indicated when the event was created. WebServices
RPE-18181 There was an issue that could cause an error when posting orders that contain custom properties. This has been corrected.  WebServices
RPE-18190 OT1 REST workerPerformance data does not align to RNA UI Performance Monitoring Reports. WebServices
RPE-18408 Unable to update equipment field via WS. WebServices
RPE-20345 As this customer has a deleted region with the same  name JANESVILLE the call didnt handle with that 2 regions (alive & deleted ). Now the call is sending the correct delete status to only consider the alive ones. WebServices
RPE-20936 GET Events REST API not returning accurate information for StopSequenceChangeEvents WebServices
RPE-22144 There was an issue where the geocode accuracy and latitude and longitude were being incorrectly reset updating a field on a previously geocoded location. This has been corrected.  WebServices
RPE-25229 Pickup Task Type not recognized when posting new routes to OT1 dailyplan/route REST API WebServices
RPE-26666 OT1 REST API call failing for endpoint events/CRITICALEVENT WebServices
RPE-34135 There was an issue with a REST method that prevented the service pattern set from saving when adding recurring orders. This has been corrected. WebServices
RPE-38507 Workercompliance WS is returning 500 Internal Server Errors. WebServices
RPE-39498 Post Order Selector and Case Sensitive requirement for WS. Documentation added in order to clarify this field in REST. WebServices
RPE-39844 Customer is calling the worker compliance method and the lastknowndutystatus is correct however the lastdutystatuschangetime is not up to date. Field lastDutyStatusChangeTime is now displayed correctly. WebServices
RPE-41745 Not receiving regionIdentities.identifier when making GET Locations/RouteActuals REST API. WebServices
RPE-41770 The returned response for REST PUT or PATCH when changing the route phase, was updated to contain appropriate error messages. WebServices
RPE-42950 MA API updateDocs / replaceDocs call works on progressed stops in UAT but not in production WebServices
RPE-47756 A new parameter was added to the REST Route Plan, setPlanStatusToBuilt.  When the parameter is set to true the route is saved to build status. WebServices
RPE-52333 Failing API call for specific region on 7/21/2021 WebServices
RPE-53605 POST SKU from OT1 REST API not working - No permission WebServices
XRS-9764 There was an issue with the ELD Driver Log Report showing an incorrect ending Odometer value that resulted in an incorrect Total Distance value. This issue has been corrected. Host
XRS-9938 There was an issue in the UVA Tool using the 'Edit' button to reclassify Drive segments individually, there are no Drive segments listed. When viewed in the Driver Log Editor to assign to a Driver, there are 2 Drive segments listed. This issue has been corrected. Host
XRS-10201 There was an issue with the Fuel Efficiency Report that has been corrected. Users will now be able to see the full records on a period of time regardless of the organization the vehicle was in. Host
XRS-10647 There was a vehicle web service error that was breaking an existing integration. This issue has been corrected. Host
XRS-10930 There was an issue with the Fleet Report not calculating ending odometers correctly. This issue has been corrected. Host
  • Was this article helpful?